Logo
Get direct access via EPNdirect to Europe’s most comprehensive database of electronic products & suppliers
Search    Advanced Search Criteria

TOP PRODUCTS

Print | PDF | Digg This | Slashdot It! | Add to Del.icio.us |
Surface Mount Oscillators
are suitable for fibre channel applications
10/01/2012
Report dead link
Reference: 46632

Euroquartz has introduced the HPK5361 and 5761, two surface mount PECL (positive emitter coupled logic) oscillators for use in SONET, Ethernet, broadband access, microprocessors, DSP, FPGA, industrial controllers, test and measurement equipment and fibre channel applications. The oscillators offer low phase noise of -138dBc/Hz at a frequency of 10kHz and femtosecond integrated phase jitter of 200fs. They offer frequencies ranging from 40 to 200MHz, and feature differential PECL square wave output logic. The oscillators operate with a 2.5 or 3.3V power supply at commercial and industrial temperature ranges of -10 to +70°C and -40 to +85°C, respectively. They ensure frequency stability of ±25, ±50 and ±100ppm. They feature start-up time of 3 to 10ms, ageing of ±3ppm/year maximum and duty cycle of 50±5% measured at 50% of waveform. The HPK5361 oscillators are housed in a standard 5x3.2x1.2mm surface mount package and the HPK5761 oscillators are available in a 7x5x1.8mm package. Both oscillators are supplied on 16mm tape, 8mm pitch, 180mm diameter reel, 1,000 pieces/reel. They can withstand reflow soldering temperatures up to 260°C for 10s maximum, two cycles maximum.


EUROQUARTZ Ltd.

Blacknell Lane
Industrial Estate
TA18 7HE Crewkerne - United Kingdom -Somerset
tel: +44-(01460)230000
fax: +44-(01460)230001

RELATED ARTICLES FROM EUROQUARTZ Ltd. All their related products...
Search in the archives
Advanced Search Criteria
Magazine_jun_2012_small
Loupe
issue
June 2012