|
(12/08/2010)
Rittal has introduced a connector gland, which offers less assembly work, a flexible sealing system for different cable diameters and simple entry of pre-assembled cables for easy routing. Consisting of a sealing frame suitable fo...
More about Connector gland features flexible sealing system |
|
(30/07/2010)
Multi-Seals has introduced an alternative to liquid adhesives for component assembly. Multi-Seals F05 Poly-forms are flexible pre-shaped adhesives designed for bonding diverse materials, including metals, plastics, and glass. The...
More about Flexible adhesive preforms prevent drips and dispensing inconsistencies |
|
(02/07/2010)
R. STAHL is launching a set of slim field housings made of stainless steel for space-saving and protected installation of operating and monitoring systems and peripheral HMI components. The Slim-Line housings offer tailor-made sol...
More about Stainless steel field housings allow protected installation of peripherals |
|
(25/06/2010)
Schroff UK has introduced two-post and four-post open patching frames and associated horizontal and vertical cable management products, designed primarily for high cable density data centre and computer room installations. Manufac...
More about Cable management for open frame patching racks |
|
(22/06/2010)
TechMESH Knitted Wire gaskets from Leader Tech make reliable electrical contact between parallel metallic surfaces in broad ranging commercial and military-grade electronic enclosures. When installed between gaps, seams and openin...
More about Knitted wire gaskets feature reliable electrical contact |
|
(21/06/2010)
Chomerics Europe, a division of Parker Hannifin, has introduced an EMI shielding materials that use low transfer impedance Ni/Al (Nickel/aluminium) particle filled elastomers to give enhanced levels of shielding effectiveness. Av...
More about Ni/Al filled elastomer gaskets feature high shielding effectiveness |
|
(14/06/2010)
A solar fuse ASO and fuseholder FSO from Schurter are designed for higher voltage ratings, associated with photovoltaic applications. The compact fuse measures 10.3x38mm and operates at up to 1000V DC. Current range is from 1 to 3...
More about Solar Fuse and Fuseholder |
|
(08/06/2010)
FDB Panel Fittings has introduced a new clip-on rod guide for flat rods. This quick push on guide fits to an M6 weld stud and then accepts a clip-in industry standard 14x3mm flat rod. For multi-cabinet lock installations, the fitt...
More about High speed rod guide allows tool-less installation |
|
(02/06/2010)
Orion Fans, a division of Knight Electronics, has introduced 10inch AC fans designed specifically to move a large amount of air through confined spaces. Designated the OA254 series, the AC fans measure 254x89mm and feature airflow...
More about AC fans feature high CFM rating |
(26/05/2010)
The A4982/A4984/A4985 and A4988 microstepping motor drivers from Allegro Microsystems each use a simple ‘step' and ‘direction' interface and feature a built-in translator for easy operation. The devices require few external compon...
More about DMOS microstepping motor drivers feature built-in overcurrent protection |
(14/05/2010)
Orion Fans, a division of Knight Electronics, has expanded its line of fan accessories with louvered fan guards. The LFG120B and LFG172B louvered fan guards are heavy-duty filtered guards designed to prevent dust and dirt from ent...
More about Louvered fan guards suit enclosure applications |
|
(13/05/2010)
Baolab Microsystems has announced a new technology to construct nanoscale MEMS (micro electro mechanical systems) within the structure of the actual CMOS wafer itself using standard, high volume CMOS lines, which is easier and qui...
More about NanoEMS technology to construct nanoscale MEMS |
(03/05/2010)
Laird Technologies has released its enhanced Tlam SS LLD for use as a thermally conductive PCB (printed circuit board) substrate. The product is a versatile, thermally-enhanced PCB substrate system specifically designed for heat d...
More about Thermally conductive PCB substrate provides improved heat dissipation |
|
(30/03/2010)
Rittal has repositioned the fan within the raised floor of its new CRAC (computer room air conditioning) system, achieving an increased efficiency of 30% of fan energy consumption.The new system is suitable for low and medium dens...
More about 118kW climate control system maintains humidity at constant levels |
|
(23/03/2010)
Haydon Kerk Motion Solutions has introduced the RoHS-compliant IDEA non-captive programmable linear actuator. In addition to programmability through an easy-to-use graphic user interface, the device configuration is capable of up ...
More about Non-Captive Linear Actuator |
|
(01/02/2010)
Orion Fans has introduced Challenger series sealed sleeve fans. The fans are offered in seven sizes ranging from 40x10mm to 120x38mm, and are available in 12 and 24V DC versions. Airflow ranges from 6.7 to 105CFM. The fans feature...
More about UL94V-0 sealed sleeve fans feature brushless DC |
|
(25/01/2010)
CamdenBoss has launched a range of polymer PTC (positive-temperature-coefficient) fuses for use in a range of applications where protection from overvoltage/-current conditions is required. The devices are available for voltages f...
More about Radial Lead PTC Fuses |
(21/01/2010)
Laird Technologies has released modified Tunnel series TEAs (thermoelectric assemblies). The series is designed with a high-performance cross flow technology maximising heat transfer when pulling air through a heat exchanger. Heat...
More about AA and DA thermoelectric assemblies maximise heat transfer |
|
(21/01/2010)
UMT 250 from Schurter has been extended with a clip option. The new product offers time-lag characteristic according to IEC 60127-4 and is a UMF (universal modular fuse) with rated current values from 315mA to 4A. The product prov...
More about IEC time-lag SMD fuse features clip option |
|
(29/12/2009)
OTB Solar and Trident Solar have partnered for bringing inkjet technologies to the solar market. As part of this collaboration, Trident's 256Jet-S inkjet printhead will be integrated into OTB Solar's PixDro open architecture inkje...
More about Partnership formed to bring inkjet technologies to solar market |
|
(18/12/2009)
Where space is limited, surface-mount fuses that are replacable without soldering offer time-lag characteristics according to IEC 60127-4. The UMT 250 has been extended with a clip option by Schurter. The UMZ 250 is a universal mo...
More about Surface-Mount Fuse Series |
(27/11/2009)
Laird Technologies has expanded its global distribution product portfolio with Mouser Electronics to include its thermal management product line.The company designs thermal management product solutions including high-performance T...
More about Expanded thermal management products include high-performance TEAs |
(26/11/2009)
Taoglas has released LTE and WiMax antenna solutions for the M2M market. There are two antenna solutions: embedded and external. The FXP400 and FXP100 are wideband embedded antennas. The LTEA.4000 external solution for packaged M2...
More about LTE and WiMax antennas enable M2M applications |
|
(14/10/2009)
Orion Fans has developed a new family of sealed sleeve bearing DC fans. The Challenger series fans have a long life expectancy. MTBF is in excess of 200,000 hours. The new sealed sleeve fan technology retains lubricant by using me...
More about Sealed sleeve fans feature brushless DC motor |
|
(12/10/2009)
Verotec has introduced a range of 19inch 1U standard fan trays that are designed to provide localised cooling. The standard fan trays consist of two depths, a 250mm deep unit fitted with three fans and a 350mm deep unit with six f...
More about Standard fan trays provide localised cooling |