linear ICs : oscillator circuits, filter, amplifier circuits

Get direct access via to Europe’s most comprehensive database of electronic products & suppliers

- By name
- By product type

You are in : > HOME > TOP PRODUCTS > Group: Linear ICs > Sub-group: Clock ICs (also Clock Multipliers, Multiplexer, Oscillators)

TOP PRODUCTS

Product group : Linear ICs
Product Sub-group : Clock ICs (also Clock Multipliers, Multiplexer, Oscillators)

Display:

	National unveils low-jitter clock generator (28/04/2008) A new multi-rate video clock generator with genlock from National Semiconductor delivers 40 ps peak-to-peak high-definition (HD) clock output jitter. The LMH1982 provides reference clocks for video analogue-to-digital converters (... More
	1.6GHz Clocking Family (06/04/2008) National Semiconductor has introduced a family of three ultra-low noise and fully-featured clock buffers, dividers and distributors that simplify system-clock design while providing very low additive noise levels (30fs) of root me... More
TTI introduces SAW resonators from Murata (04/04/2008) TTI has announced the availability of a new family of SAW resonators from Murata to support short range devices operating in the ISM300 and ISM400 bands. New technology developed by Murata's Kanazawa R&D department has enabled per... More
	Silicon introduces Si5319 any-rate precision clock (01/04/2008) Silicon Laboratories has announced the expansion of its portfolio of reconfigurable, frequency-agile precision clocks to include a single input, single output jitter-attenuating clock multiplier IC. The new Si5319 Any-Rate Precisi... More
	Connor-Winfield introduces Stratum 3E HCMOS oscillator (25/03/2008) The Connor-Winfield XO125 is a 5V Voltage Controlled Oven Compensated Controlled Crystal Oscillator (VCOCXO) with an HCMOS output. The XO125 is designed for Stratum 3E applications requiring a low aging rate and tight frequency st... More
	Maxim introduces Stratum 3 timing-card IC (13/03/2008) Maxim Integrated Products has introduced the DS3102, a timing-card IC to provide full carrier-class, Stratum 3 clock synchronisation for G.8262-compliant synchronous Ethernet (Sync-E) equipment. This device is built on Maxim's sec... More
Intersil introduces timing regenerators and multiplexers (07/03/2008) Intersil has introduced a new family of timing regenerators and multiplexers for HDMI and DVI applications. The ISL54100, ISL54101, and ISL54102 are TMDS (Transition Minimised Differential Signaling) solutions that perform both re... More
	Intersil introduces AC-driven real time clocks (29/02/2008) Intersil has introduced full-featured, AC-driven Real Time Clock (RTC) devices. The new ICs will be designed into a wide range of industrial and consumer products, from power meters and security devices to white goods and other ap... More
	Abacus signs PDI for frequency control (20/02/2008) Abacus has announced a new franchise agreement with Precision Devices (PDI) covering the support of precision engineered crystals, crystal filters and oscillators, VCXO's, TCXO's and OCXO's throughout the UK and Ireland. Abacus se... More
	Chronos Technology introduces the 8200 Rubidium Oscillator (16/02/2008) Chronos Technology has introduced the 8200 Rubidium Oscillator from US supply partner, Symmetricom. The ruggedised rubidium oscillator is designed for ground tactical, shipboard and airborne applications where good frequency stabi... More
	New 1930-2110 MHz VCO from Crystek Corporation (06/02/2008) Crystek's CVCO55CC-1930-2110 VCO operates from 1930 MHz to 2110 MHz with a control voltage range of 0.5V~18V. This VCO features a typical phase noise of -110 dBc/Hz @ 10KHz offset and has good linearity. The model CVCO55CC-1930-21... More
	Quad-Output Clock Generators (25/01/2008) The MAX3624 and MAX3625 are high-performance, quad- and triple-output clock generators for network equipment. The chips use a low-noise VCO and PLL architecture to generate a high-frequency, ultra-low-jitter (0.36psrms) clock sign... More
	New 3175-3375 MHz VCO from Crystek Corporation (24/01/2008) Crystek's CVCO55CC-3175-3375 VCO operates from 3175 MHz to 3375 MHz with a control voltage range of 0.1V~16V. This VCO features a typical phase noise of -106 dBc/Hz @ 10KHz offset and has good linearity. The model CVCO55CC-3175-33... More
	LVPECL/LVDS Clock Dividers (04/01/2008) Micrel added four divide-by-three and divide-by-five clock dividers to its product portfolio. The SY89228 LVPECL and SY89229 LVDS dividers are 1GHz devices that feature FSI (fail-safe-input) circuitry; there are also the SY89230 L... More
	New 1 GHz VCO from Crystek Corporation (29/12/2007) Crystek's CVCO55CX-1000-1000 VCO operates at 1000 MHz with a control voltage range of 0V~5V. This VCO features a typical phase noise of -135 dBc/Hz @ 10KHz offset and has good linearity. The model CVCO55CX-1000-1000 is packaged in... More
	Clock-Generation ICs (20/12/2007) The NB3N3002 and NB3N5573 are 3.3V clock generators that create selectable HCSLs (host clock-signal levels) and sub-picosecond jitter quality clocks at 25, 100, 125 and 200MHz. These devices are well-suited for PCI Express, GigaBi... More
802.11n in a Single-Chip (08/12/2007) Both the dual-band AR9280 and single-band AR9281 PCI Express (PCIe) chips integrate the radio, baseband/MAC and host PCIe interface into a single 10x10mm device. Reference designs are available for both PCIe half-mini card and ful... More
	Crystek Corporation introduces new 2778-2945 MHz VCO (22/11/2007) Crystek's CVCO55CC-2778-2945 VCO operates from 2778 MHz to 2945 MHz with a control voltage range of 0.1V~16V. This VCO features a typical phase noise of -110 dBc/Hz @ 10KHz offset and has good linearity. The model CVCO55CC-2778-29... More
Thinnest 32.768 kHz Crystal Ready for Smart Cards (15/11/2007) CC7V-T1A 0.53.2x1.5x0.5 mm32.768 kHzHeight : 0.5 mm max ! RTCsRV-Series250nA OscilllatorsOV-7604-C732.768 kHz3.2x1.5x1.0 mm... More
Reliable in extreme environments…High Reliability Quartz Crystal Oscillators (12/11/2007) Statek oscillators are ideal for high shock, wide temperature range and harsh environment applications. They have been proven in a wide range of systems, from aircraft avionics and cockpit instrumentation to oceanography, process ... More
	EPCOS develops new duplexer for the WCDMA Band VIII (02/11/2007) EPCOS has developed a small duplexer for the WCDMA Band VIII. The duplexer is based on a SAW-SAW combination and measures in at only 3.0 x 2.5 x 1.1 mm3. The product features high isolation values with simultaneously low insertion... More
	New series of temperature-compensated crystal oscillators from Greenray (02/11/2007) Greenray Industries has announced the availability of the T1220 Series TCXO. The T1220 temperature compensated crystal oscillator offers OCXO-like temperature stabilities - as low as ±7 x 10-8 - and the operating temperature range... More
	Maxim delivers new JTAG signal multiplexer (23/10/2007) Maxim Integrated Products has introduced the DS26900 JTAG signal multiplexer with secondary port autodetection. The the DS26900 is a MicroTCA -compliant single-chip solution providing 3 arbitrated master ports and 18 independent s... More
	Crystek introduces new 0800-1600 VCO (23/10/2007) Crystek's CVCO55CW-0800-1600 VCO operates from 800 MHz to 1600 MHz with a control voltage range of 0.5V~19V. This VCO features a typical phase noise of -100 dBc/Hz @ 10KHz offset and has good linearity. The model CVCO55CW-0800-160... More
New high-speed video multiplexers from TI (17/10/2007) Texas Instruments Incorporated (TI) has introduced three high-speed video multiplexers, combining wide bandwidth, high slew rate, fast switching time, and low switching glitch to optimise performance in professional video applicat... More