TOP PRODUCTS

Texas Instruments has introduced the OPAx836 single and dual ADC drivers to its general-purpose, low-power, rail-to-rail output op amps series. The drivers feature power consumption of 1mA/channel and provide bandwidth of 205MHz f... More about Rail-to-Rail Output Op Amps

Analog Devices has announced four high-speed ADCs to its data converter product portfolio. The two octal- and two quad-channel converters are designed for medical imaging and communications applications. The AD9257 14bit and AD963... More about Octal and quad ADCs feature 650MHz full-power analogue bandwidth

The 12bit DAC3162 and 10bit DAC3152 from Texas Instruments are DACs designed for wideband transmit systems such as wireless basestations, software defined radio, point-to-point microwave, e-band radio and portable test equipment. ... More about Pair of Low-Power Converters

Datel has announced the DAC-12100 series of 12bit current output DACs that have transistor-transistor logic and CMOS compatible inputs. With a 100MHz conversion rate, the converters are suitable for radar, signal reconstruction, w... More about 12bit Current Output Converters

Pentek has announced its multi-channel data converter with digital down and up converters. As a member of the Cobalt family of express mezzanine card modules, the converter has a Xilinx Virtex-6 FPGA at its core. The converter del... More about Digital Data Converter

NXP Semiconductors has introduced the TFF101xHN integrated down converters for use in LNB (low noise block) 10.7 to 12.75GHz Ku (Kurtz-under) band satellite receiver systems. They are used at the front of a parabolic satellite dis... More about Integrated Down Converters

Texas Instruments has introduced a family of dual 16-, 14- and 12bit DACs. The DAC8562 family is suitable for space and power-constrained systems, such as PLC (programmable logic control), analogue output modules, motor control, a... More about DACs feature precision with 0.1nVs glitch energy

M/A-COM Technology Solutions has introduced a 1bit digital attenuator for CATV (cable TV) and STB (set-top box) front end applications. The MAAD-010305 is a 15dB step GaAs (gallium arsenide) MMIC (monolithic microwave IC) digital ... More about Attenuator for cable TV and set-top box front end applications

Texas Instruments has introduced two bipolar, 12bit, 1Msample/s SAR (successive approximation register) ADCs for programmable logic control and data acquisition. The four-channel ADS8634 and eight-channel ADS8638 operate in temper... More about Two Bipolar 12bit ADCs

Linear Technology has introduced the LTC2997, a temperature-to-voltage converter with built-in series resistance cancellation for 2.5 to 5.5V systems. The converter is a micropower temperature monitoring solution that is claimed t... More about Temperature-to-voltage converter provides 4mV/°C output gain

Analog Devices has released single- and dual-channel 14bit ADCs suitable for communications, instrumentation and test and measurement applications and also battery-powered, hand-held instruments, scopes and portable medical device... More about Single and Dual 14bit ADCs

National Semiconductor has introduced a 16bit DAC featuring a single-wire interface and 4 to 20mA current loop drive that is claimed to simplify the design of smart transmitters used in industrial two-wire sensor systems. The DAC1... More about Single-Wire DAC Interface

Texas Instruments has introduced the 16bit delta-sigma ADC with integrated PGA (programmable gain amplifier), reference, temperature sensor and four-input multiplexer for data acquisition of multiple signals from different sensors... More about Analogue-Digital Converter

GE Energy Power Electronics has announced the availability of the Lineage Power Hammerhead series of industrial DC/DC circuit board power conversion modules. The modules offer an input voltage range from 18 to 75V DC with total ef... More about Power Conversion Modules

Microchip has announced its standalone six-channel AFE (analogue front-end) for three-phase power monitoring and metering. The MCP3903 AFE includes six 16 and 24bit delta-sigma ADCs with a  signal-to-noise and distortion of 89dB a... More about Stand-Alone Analogue Front-End

Texas Instruments has expanded its line of ADCs with eight dual-channel devices available in 12 and 14bit resolutions at speeds from 65 to 250Msamples/s. The ADS42xx family of ADCs provide the performance and bandwidth for 3G/LTE ... More about Eight Dual-Channel ADCs

Texas Instruments has introduced an isolated amplifier and a delta-sigma modulator that provide shunt-based current measurement in motor control and green energy applications. The AMC1200 isolated amplifier and AMC1204 delta-sigma... More about Precision Data Converters

An ultra-low power stereo DAC from Wolfson Microelectronics delivers high-quality audio to portable applications such as mobile phones, tablet PCs, wireless headsets, multimedia players and handheld gaming devices. The WM8918 DAC ... More about DAC with dynamic range controller enhances playback experience

Crydom has introduced the LifePlus ED series of AC and DC output pluggable solid state relays that allow electromechanical relay users to replace the 12x29mm electronic medical records with solid-state relay technology. The compan... More about Solid State Relay Series

Hittite Microwave has introduced three ADCs that are suitable for digital storage oscilloscopes. The HMCAD1520, HMCAD1511 and HMCAD1510 ADCs feature integrated crosspoint switches that allow switching between quad, dual and single... More about ADCs for Oscilloscopes

RF Micro Devices has launched two VCAs (voltage controlled attenuators) that have good linearity with a third order intercept point of over 50dBm over a gain control range of 30dB. The RFSA2013 and RFSA2023 VCAs operate from 5 and... More about Voltage controlled attenuators have third order intercept point of over 50dBm

Texas Instruments has introduced a quad-channel, 16bit ADC for magnetic resonance imaging applications. The ADS5263 ADC is available in 14 and 16bit resolution modes that allows designers to switch between low-power and high-speed... More about ADC in Two Resolution Modes

Analog Devices has introduced a 16bit DAC that attains a noise of -164dBm/Hz in a 7x7mm lead frame chip scale package, making them suitable for wireless communication systems. The AD9146 DAC integrates an 8bit LVDS interface and p... More about DAC for wireless communication systems

The 16bit ISLA216P series of ADCs from Intersil are developed using the company's FemtoCharge technology and feature sample rates up to 250Msamples/s. The ADCs consume power of 786mW and reduce heat dissipation and cooling require... More about ADCs have 75dBFS SNR and sample rates up to 250Msamples/s