mechanical components, antennas, EMC enclosures, fans : EPN Online

Get direct access via to Europe’s most comprehensive database of electronic products & suppliers

- By name
- By product type

You are in : > HOME > TOP PRODUCTS > Group: Mechanical Components,Subassemblies,Enclosure > Sub-group: EMI Shielding Gaskets

TOP PRODUCTS

Product group : Mechanical Components,Subassemblies,Enclosure
Product Sub-group : EMI Shielding Gaskets

Display:

Customisable Gaskets (25/01/2010) The complex task of protecting sensitive electronics from adverse environmental conditions, as well as from unwanted electromagnetic interference, can often be achieved by integrating a high-performance, conductive gasket into the... More
	Oriented Wire Gasket (27/11/2009) TechSIL 8000 oriented wire gasket from Leader Tech prevents unwanted interference from leaking into the environment through electronic-enclosure gaps and openings. Available in strip and sheet form, the silicone-based material is ... More
Multi-extrusion shielding gaskets provide better EMI protection (23/11/2009) Laird Technologies has released EMI Gemini, multi-extrusion shielding gaskets. The products feature a thin, electrically-conductive filler elastomer gasket layer and an inner, non-conductive silicone coated core gasket. The conduc... More
Form-in-place gaskets provide EMI shielding (02/11/2009) Laird Technologies has added three new products to its EMI Sentry form-in-place gasket family. This form-in-place gasket family provides EMI shielding while offering heat and humidity resistance, better adhesion strength, and a mi... More
	Two Conductive Elastomers (04/02/2009) Conductive elastomers can be used as gaskets and gasket strips for EMI shielding of electronic devices. The base elastomer is silicon for normal environments and fluorosilicon for fuel and oil resistance. Both offer a temperature ... More
Laird Technologies introduces a family of Form-in-Place gaskets (02/02/2009) Laird Technologies has unleashed its family of Form-in-Place gaskets, the EMI SENTRY. The EMI SENTRY product line consists of four silicone-based pastes for dispensing onto a substrate. They are the SNK55-RXP, a silicone with silv... More
	Gaskets Material (08/01/2009) Electrically conductive FIP (form-in-place) gaskets from Chromerics now include materials for consumer, industrial, and military/aerospace applications. The FIP materials can reduce the installation cost of an EMI gasket by up to ... More
	Manufacturers of EMI gaskets, components and environmental seals and supply them FAST... ...a signal feat. (05/10/2008) ... More
	EMI/RFI Shielding Solutions (18/08/2008) ... More
	EMI/RFI Gasket Solution (02/04/2008) The V series of variable finger snap-on BeCu gaskets now has twice the shielding capacity. By reducing the number of fingers on a strip, the shielding effectiveness is increased - up to 100db attenuation - since there are fewer ga... More
Laird Technologies introduces 3D interactive design tool (11/01/2008) Laird Technologies has announced the launch of its new Virtual Design Tool for Fabric-over-Foam EMI shielding gasket products. The new web-based tool offers customers an interactive online catalogue that allows users to easily con... More
Track Mount Shielding (18/11/2007) Distortion Free Installation Beryllium copper finger stockGap range - 1,3mm to 6,4 mmSecurity of mechanical assemblyIdeal for bi-directional applicationsWide range of plating optionsEconomical and durable solutionInstalls with tap... More
	Probably, no definitely… the LARGEST independent UK manufacturer of EMI gaskets & components. (15/11/2007) We really put the customer first providing an in depth service, technical back up, design advice and good old customer support. BIG enough to deliver, small enough to care. Manufacturers of EMI gaskets, components and environmenta... More
	EMI Shielding Cans (20/08/2007) The SmartShield product line offers multi-cavity, board-level EMI (electromagnetic interference) shielding. Made from recyclable materials, the product is RoHS- and WEEE-compliant and can be used in a myriad of applications. The s... More
	Thermal-Management Material (01/08/2007) Offering a thermal performance 3.5 times better than epoxy glass-on-aluminium alternatives, the Bond-Ply TCP-1000 dielectric material can easily be processed by most PCB shops with standard multilayer vacuum-lamination equipment. ... More
Board-Level Shield (01/08/2007) The Laird microwave board-level-shield product offering is targeted at high-frequency applications (over 6GHz). It is a result of the company's convergence strategy, which merges two or more unrelated technologies into one unique ... More
	EMI Soft-Shielding Gasket (30/07/2007) The Soft-shield 3500 EMI shielding-gasket material delivers multiple benefits on LCD televisions. The material, which consists of an electrically conductive fabric wrapped around a urethane foam core, forms a complete solution in ... More
	Beryllium copper gaskets from TBA ECP now ROHS-compliant (17/03/2007) EMI shielding specialist, TBA Electro Conductive Products (ECP)'s beryllium copper fingerstock gaskets for EMI shielding now meet the Restriction of Hazardous Substances Directive 2002/95/EC (RoHS Directive).The Directive banned t... More
	EMI Gaskets (01/11/2006) The KE Kitigawa EMI shielding gaskets, as supplied by leading Italian distributor Futura, come in dimensions of 100x10x25mm. The conductive fabric is made up a 100% polyester raw material in a woven fabric, with silver, copper and... More
	Halogen-Free EMI Shields (01/11/2006) The EcoGreen fabric-over-foam electromagnetic interference shielding gaskets are a direct response to recent environmental directives such as the European Union's RoHS and WEEE that restrict the use of certain hazardous substances... More
	Elastomeric Shielding Material (01/10/2006) The two UL94 V0 flame rated elastomeric materials CHO-MUTE 9005 and CHO-MUTE 9025 are specifically designed to deliver microwave and radio frequency absorption, down to below 1GHz. The high permeability, wide band attenuation mate... More
	PC-Board Shields (01/04/2006) Laird's PC-board shields allow electronics to be shielded from the unwanted effects of EMI on PCBs. They have solid tops, scored to allow peel-off when access to board-level components within the can is required. This innovative p... More
	Board-Level Shielding (01/03/2006) Using the cost-saving photo-etch process to manufacture board-level shielding components improves design flexibility, shortens lead times, and eliminates the expense of hard tooling. Covers and mounting pins can be designed in any... More
	Microwave Absorber: Does Exactly What it Says on the Tin (01/03/2006) As the name implies, microwave-absorbing materials are coatings whose electrical and magnetic properties have been altered to allow absorption of microwave energy at discrete or broadband frequencies. The goal of the absorber manu... More
	Flame-Retardant EMI Gasket (01/03/2006) The EcoGreen "Fabric-Over-Foam" electromagnetic-interference shielding gaskets are designed specifically in response to recent environmental directives such as the European Union's RoHS and WEEE, that restrict the use of certain h... More