TOP PRODUCTS

Fischer Elektronik has offered a new design of male headers suited to the "through hole reflow soldering technique". The headers are available in single and double row design with 1 to 36 poles (single row design) and 2 to 72 pole... More about Male headers available in single and double row designs

Fischer Elektronik has introduced specially-designed heatsinks TO220 housing with reduced base plate thickness. These heatsinks are easily attached by being pushed onto the TO220 housing. Integral retaining clips keep the componen... More about Attachable heatsinks with reduced base plate thickness

Orion Fans, a division of Knight Electronics,  has developed a series of low profile, stackable DC fans., Designated the OD172SAPL series, the stackable, low-profile, aluminium DC fans feature two flat sides and measure172x150x38m... More about DC fans feature two flat sides for side-by-side installation

Laird Technologies has released enhanced Tlam SS LLD for use as a thermally conductive PCB substrate. This PCB substrate is specifically designed for heat dissipation in bright and ultra-bright LED module applications. A copper ci... More about PCB Substrate System

Schurter has added an actuator to its TA35 circuit breaker series. It has what the company describes as a grip and turn knob, which is suitable for switching with gloves or where long feedback is desired. The design allows for cus... More about Circuit Breakers

Rittal has introduced a "condensation drain relief" device, which enables the liquid to be discharged below the enclosure while still maintaining the IP rating. Designed to be fitted to the enclosure floor, the polycarbonate devic... More about Waterproof enclosures meet IP55 rating

Fujipoly has announced the availability of Sarcon GR-HF gap filler pads. These TIMs (thermal interface materials) are manufactured with a hardened top surface as well as a reinforced nylon mesh layer. The added reinforcement and l... More about Advanced Gap Filler Pads

Chomerics Europe has introduced a version of its Premier conductive plastic shielding material that offers enhanced fuel resistance and HDUL (heat deflection under load) specifications. Complementing the existing range of polycarb... More about Conductive Plastic Material

ITT ICS has developed two new PCMCIA I/O kits - snap-fit and ultrasonic - each available with a range of options and customisable features for maximum design flexibility. The snap-fit kit consists of a pair of robust, mechanically... More about PCMCIA I/ O Kits

Rittal has introduced two ranges of guide rails for PCB (printed circuit boards) which can be made to suit any depth of PCB insertion.Utilising plastic end pieces, which include a funnel entry to ease PCB insertion, the new guides... More about 2HP guide rails discharge static charges

Tyco Electronics has released a RoHS-compliant G13 style SMT assembly and end-cap cover for the solid state lighting industry. The new product supports PCBs and LED strip lighting modules found in the standard T8 and T12 fluoresce... More about SMT assembly and end-cap cover facilitates high-speed processing

Harwin has launched the EZ BoardWare brand of surface mount products that improve manufacturing flexibility, reduce manufacturing costs and improve field maintenance.In EMC, shielding cans are usually soldered to the board as a se... More about Surface mount components eliminate multi-layer construction

C&K Components has developed new silicone rubber-sealing boots for its 7000 series miniature, 9000 series power, and military-qualified toggle switches. The new boots are used to seal the toggle switches to protect against contami... More about Silicone Rubber Boots

... More about Super Green Fan : Filling the Air with Wonder

Harwin has broadened the range of surface mount EMI/RFI shield clips with the launch of its Maxi Clip, which handles protective cans with wall thicknesses between 0.7 and 1mm. The use of clips reduces assembly time and simplifies ... More about EMI/RFI shield clips reduce assembly time

CILS (Computer Imprintable Label Systems) has launched its CIL 8200Smetalised polyester range of chemical resistant labels where variable data can be added ‘in-house' using a thermal transfer printer. The chemical resistant labels... More about Chemical resistant labels support printing of variable data

Rittal has expanded its range of configurators for the comfort panel and optipanel command panels. The new CP-C support arm system and the CP-S, CP-L, CP-XL support arm systems can be configured quickly and securely through the In... More about System configurator enables configuration of support arm systems

Computer Imprintable Labels Systems (CILS) has launched the CIL 8900 range of high-temperature-resistant labels. These products are capable of resisting temperatures of up to +400°C, chemical and solvent washes on PCBs and lead-fr... More about Customised Labels

Fujipoly has introduced the Sarcon GR-Sd low-compression-force thermal-gap-filler pad. This material can transfer heat from its source to a nearby heat sink in applications that require low force on the component. The material off... More about Thermal-Gap-Filler Pad

Elettric 80's Freeway, an end-of-line automation concept, includes Dragon, a palletising robot range, Silkworm, a stretch wrapper solution and the LGV-based solutions for warehouses and truck loading. These solutions are integrate... More about Automated system facilitates materials handling

Vacuumschmelze (VAC) will hold talks at ‘Supply on the wings,' an international trade conference attached to Airtec in Frankfurt. The conference serves as a platform where experts from all fields of the aviation and aviation suppl... More about Demonstration of soft magnetic materials for aviation applications

E-Mark has introduced SMT box contacts for direct PCB mounting. Capable of being oriented for either horizontal or vertical (for bottom post entry) mounting, these contacts accept either 0.025inch square posts or 0.032inch round p... More about SMT box contacts feature matte tin over copper plating

Multi-Seals has introduced Wash-Away dissolvable spacers, designed to provide consistent spacing between printed circuit boards and PCB components. These organic polymer spacers locate PCB components during soldering operations. A... More about Dissolvable spacers provide uniform spacing between components and boards

Thin Metal Parts (TMP) has introduced next generation SMT (surface mount technology) for stencil products. The company manufactures high-precision thin metal products and for the manufacturing purpose, a new set of base materials,... More about Stencil products meet specific needs in printing industry