TOP PRODUCTS

AVX claims that it has developed the industry's first 63 and 75V single-anode tantalum polymer capacitors. Part of the TCJ Series polymer tantalum capacitors, the surface mount devices high voltages: 1uF at 63V, 4,7uF at 63V, 10uF... More about Capacitors' Voltage Choice

Vishay Precision Group has announced that its Vishay metal foil resistors division is offering 12 series of foil resistors built on Bulk Metal Z- and Z1-Foil technology for use in high-temperature energy and transportation applica... More about Precision Foil Resistors

AVX has added two series of tantalum chip capacitors to its range of TACmicrochip devices. The TLC capacitors deliver 15 and 10µF at 4 and 6V, respectively. They provide high capacitance-voltage performance using the X5R dielectri... More about Tantalum Chip Capacitors

Vishay Intertechnology has released a thick film resistor in a 57x60mm package, which offers a power rating of 1100W at a heatsink temperature of +25°C. The LPS1100 resistor is non-inductive with less than 0.1μH and provides a res... More about 1100W Power Thick Film Resistor

Wurth Electronics Midcom has introduced a series of transformers designed to work with Linear Technology's LT3799, LT3799-1 and LT3798 isolated no opto-coupler flyback controllers with active PFC designs. The transformers use diff... More about Transformers with 4 to 100W Power

An addition to its PolySwitch LVR (line voltage regulated) family, the LVB125, has a ‘plastic box' package for circuit protection where potting or encapsulating compounds are used. According to TE Circuit Protection, the package r... More about Resettable Line Voltage Rated Device

Coilcraft has introduced the PFL4514 series of shielded power inductors to increase board density. The wirewound surface-mount inductors require a 16mm² of board space and are 1.4mm high. They can handle current of up to 4.2A. Mag... More about Magnetically shielded power inductors for use in battery-powered devices

TDK has introduced the ACP3225 wirewound common-mode filter that features a current capability of 1.2A and a common-mode impedance of 1000Ω. With a form factor of IEC 3225 measuring 3.2x2.5x2.3mm3, the filter is suitable for use i... More about Wirewound common-mode filter has impedance of 1000Ω for precision

TDK has introduced the MHQ1005P series of multi-layer ceramic inductors that are suitable for use in low-loss RF matching circuits in smartphones and conventional mobile phones. The MHQ1005P2N7 inductor with an inductance of 2.7nH... More about Multi-layer ceramic inductors are for use in low-loss RF matching circuits in smartphones

State of the Art has announced the Z termination line of miniature chip resistors. The resistors feature thin film single surface and wrap around designs. They are available in size from 0.04x0.02 to 0.025x0.025inch, with toleranc... More about Thin film chip resistors with gold over nickel finish for aerospace electronics

Vishay Intertechnology has announced the MKP1848S, a metallised DC polypropylene film capacitor, that is suitable for DC-link applications. The slim capacitor features a capacitive voltage range from 2 up to 100µF, and voltage rat... More about Slim Polypropylene Film Capacitor

Vishay Intertechnology has released lead-free and lead-bearing thick film chip resistors having IECQ-CECC approval. Both the resistors are approved to EN 140401-802, version A, to meet the needs of the industrial electronics secto... More about Thick Film Chip Resistors

The MKP1847 metallised AC polypropylene film capacitor, introduced by Vishay Intertechnology, features a capacitance from 1 to 70µF and voltage ratings up to 350V. The capacitor is designed for AC filtering in UPS systems, power s... More about AC Polypropylene Film Capacitor

Molex has launched zSFP+ (small form-factor pluggable plus) interconnect system that is claimed to deliver good performance in high-speed telecomms and datacomms equipment. Designed for 25Gbit/s serial channels in high-speed Ether... More about SMT 20-circuit interconnect system for 25Gbit/s datacomms and telecomms

Renco Electronics has announced the release of its thru-hole current transformer the RL-9740. The current transformer is an advanced, encapsulated design allowing for high durability and 3750V hi-pot. The rugged construction of th... More about Current transformer with high durability for use in industrial monitoring controls

Vishay Precision Group has announced that its Vishay Foil Resistors division has released hermetically sealed PRND (precision resistor network devices) with a screen and test flow in compliance with EEE-INST-002 and MIL-PRF-83401.... More about Hermetically sealed precision resistor networks for satellites and deep-space probes

Vishay Intertechnology has introduced wide terminal, thin film chip resistors in the compact 0406 case size. The MCW 0406 AT resistors offer a resistance range from 100kΩ down to 47Ω. The resistors feature high-temperature perform... More about Thin Film Chip Resistors

TDK-EPC has extended its portfolio of compact multi-layer power inductors to include the TDK MLP1608-V series in size 1608. The miniaturised inductors are suitable for use in the power supply circuitry of mobile devices such as sm... More about Compact, Multi-Layer Power Inductors

Phihong has developed the POE31U-560DO, a passive PoE power injector that offers power outputs across dual ports. Designed for use with security cameras in remote locations, the isolated power injector relays data between ports to... More about Dual-Output, Passive Power Injector

Stackpole's flame proof SP3A axial leaded wirewound resistor is suitable for robust surge handling and fail safe fusing. The resistor is rated at 3W at 70°C and can withstand hundreds of 3kV pulses of 50ms or less without fail or ... More about Flame proof, axial leaded, wirewound resistor for surge handling and fail safe fusing

Stackpole Electronics has announced the addition of the 1210 size to the CSR and CSRN series of thick film, surface mount device, current sensing chip resistors. The CSR1210 resistor has a 0.5W power rating and can achieve resista... More about Thick film, current sensing chip resistors for power management

Vishay Intertechnology has announced a Power Metal Strip meter shunt resistor that combines a 3W power capability in the 2906 size package with resistance values down to 300µΩ. The WSMS2906 meter shunt resistor produces resistance... More about Meter shunt resistor for industrial and consumer single- or multi-phase energy meters

Vishay Intertechnology has released three common-mode chokes that are said to offer high current-handling capability and high stability for DC power lines. The ICM-2824, ICM-3528, and ICM-4743 chokes measure 7x6x4mm, 9x7x5mm, and ... More about Common-Mode Chokes for DC Power Lines

Stackpole's flameproof RNS series of mini metal film resistors is suitable for existing designs that require downsizing or added features. Specifically, the RNS series 1W has an EIA standard ¼W body size, and the RNS 2W has an EIA... More about Mini metal film resistors achieve high power handling performance in harsh environments