TOP PRODUCTS

All-dielectric bandpass filters from Optics Balzers Jena are for the SWIR (short wave infra red) spectral region and have a self-blocking filter design. They combine a wide blocking range and high pass-band transmittance in a sing... More about Dielectric SWIR Filters

Filters for TEMPEST, often referred to as Transient ElectroMagnetic Pulse Emanation Standard, prevent eavesdropping on data radiated as signals from computers and peripherals via conducting lines (such as power, telephone or contr... More about TEMPEST Level EMI Filters

Syfer has announced extensions to its solder-in panel mount EMI filters. The discoidal capacitor versions have capacitance values up to several µfarads. The SFSS (scalable file server solution) filters are constructed with a disco... More about Solder-in Panel Mount EMI Filters

Aimed at a range of 2.4GHz wireless applications using ZigBee and Bluetooth low energy technologies, the LFB182G45BG2D280 balanced output matching filter is available from Murata. The filter has been designed specifically for use ... More about ‘World's Smallest' Output Filter

The Schaffner Group has extended its product portfolio of IEC (international electrotechnical commission) inlet filters to include the power cord range IL13 with integrated locking system.  According to the company, using an easy-... More about Power cord with locking system for inlet filters

TDK-EPC has released a common-mode filter that is claimed to combine common-mode noise suppression and GSM band differential noise suppression in a single component. The TCD0806B-350-2P filter is designed for high-speed differenti... More about Thin-Film Common-Mode Filter

Precision Devices has announced the FTR80220, its latest 124.800MHz fundamental crystal filter. The crystal filter is targeted at a broad range of RF applications. The filter is claimed to offer good selectability and low insertio... More about Crystal filter provides 50Ω terminating impedence

Wurth Electronics has developed a series of current compensated SMD (surface mount device) data line filters, specifically for applications in the high frequency range. The components have a high common-mode attenuation through th... More about Current compensated data line filters for RF applications

According to Schurter, modern solar inverters, that use MPP (maximum power point) trackers, generate disturbances into both the grid's AC power line, as well as the DC side of the solar module. An AC filter is normally used on the... More about Ambient Temperature Filters

With the aim of overcoming conducted emission tests, Premo Group offers EMC filters for UPS, with various current, voltage and filter stages, designed and built according to UL1283 and EN60939-2 standards. The PFT series of EMC fi... More about Three Phase EMC Filters

Premo has introduced EMC filters that are specifically designed for lifting equipment and machines with variable speed, such as elevators or escalators. The FVDB family of EMC filters satisfies the 2004/108/EC directive, according... More about EMC filters suit escalators and elevators

A family of common mode filter devices from ON Semiconductor feature integrated ESDprotection to suppress noise and provide strong signal integrity. The EMI2121, EMI4182 and EMI4183 devices are suitable for smartphones, tablets, w... More about Common Mode Filter Devices

Meeting noise limits on noise generated from lines not connected to the grid and from MPP (maximum power point) trackers in solar inverters, the FMER SOL filters are by Schurter. They address EMC standards, EN 61000-6-3 and EN5501... More about Photovoltaic Inverter DC Filters

Three EMI filters from Gaia Converter provide enhanced EMI protection for avionic and military power systems. The compact filters featuring low dissipation are suitable for applications where space is critical without the need of ... More about Low Dissipation EMI Filters

Concepts with liquid cooling are becoming more popular in power electronics in the higher kW or MW range, because liquid cooled converters can be built significantly smaller than air-cooled models. For maximum benefit, the immedia... More about Liquid-Cooled DV/DT Filter

Schaffner offers custom liquid cooled dv/dt filters. In close cooperation with the manufacturer of power electronics, these filters can be tailored to the requirements of the system, claims the company. Dv/dt filters protect, for ... More about Liquid cooled dv/dt filters for power electronics

Crystek has introduced a new line of high pass filters, the CHPFL series. Encased in a rugged SMA housing, this filter line is designed for test equipment and general lab use.  Five models, with frequency ranges from DC to 100MHz ... More about High pass filters encased in rugged SMA housing

EMC filters have been introduced by Schurter. The DIN rail mouting FMAB-Rail and FMBB-Rail are for one-phase systems, the FMAC-Rail is for three-phase-systems and FMAD-Rail is for three-phase-systems with neutralline. The one-phas... More about DIN Rail EMC Filter Pair

The TPD6F202 and TPD4F202 from Texas Instruments are six- and four-channel electromagnetic interference filters for LCD display applications. Electrostatic discharge ratings exceed the IEC 61000-4-2 specification for contact disch... More about EMI filters feature high ESD performance

Tyco Electronics has introduced a series of EMI/RFI filter products under its Corcom brand. The company claims that the new series of Corcom SB power line filters is an enhanced version of the Corcom B series filter and offers imp... More about Power line filters feature small size

EMC filters have been introduced by Schurter. The DIN rail mounting FMAB-Rail and FMBB-Rail are for one-phase systems, the FMAC-Rail is for three-phase-systems and FMAD-Rail is for three-phase-systems with neutralline. The one-pha... More about Pair of DIN Rail EMC Filters

With three variations of two-stage filter designs, Schurter's filter series the FMBB NEO allows a specific selection of filter products for enhanced EMI products. Design C attenuates potentially conducted interferences. Design D i... More about Two-Stage Compact Filter Series

A line of low pass filters, the CLPFL series, is available from Crystek. There are five models, with frequency ranges from DC to 100 through 500MHz. The filters have out-of-band rejection, and seventh order Butterworth response. A... More about Series Of Five Low Pass Filters

A high frequency multi-layer dual low pass filter, the FI168D087018, from Taiyo Yuden is available in the EIA0603 size and measures 1.6x0.8x0.45mm. The filters can be used in place of multiple filers, for each frequency band, in m... More about Multi-Layer Pass Filter Series