TOP PRODUCTS

Ericsson has announced a digital-power, advanced bus converter platform for use with board-mounted DC/DC power modules in telecomms and datacomms. The FRIDA II platform delivers low power dissipation in end-customer systems, decre... More about Advanced Bus Converter

Ericsson has introduced the PKU-C series of 33x22.9x8.5mm, isolated DC/DC power converters that are supplied in a 16th-brick form factor. They deliver an output current up to 20A, or an output power equivalent to 100W. The 12V PKU... More about Isolated DC/DC Converters

Ericsson has introduced two 16th-brick format DC/DC converters. Designed to power 60 to 65W applications, the PKU4619 and PKU4710 are suitable for telecomms and datacomms systems and equipment and also can be used in power industr... More about DC/DC Power Converters

Designed to operate in sealed enclosures where cooling is based on passive cold-wall technology in applications such as power-amplifiers and transceivers, the PKB4513PINBLC is a 50W 1/8-brick DC/DC converter from Ericsson Power Mo... More about 1/8-Brick DC/DC Converter

Ericsson has unveiled the BMR454 DC/DC converter. The converter delivers high power and features a wide input voltage range of 36 to 75V and a tightly regulated output. The BMR454 eighth-brick family delivers up to 240W with high ... More about DC/DC converter includes PMBus interface

Offering users a pinned version of the MacroDens PKR DC/DC module, Ericsson Power Modules' PKR-PI is based on the same proprietary board-to-board technique that was developed to reduce the amount of molding. The PKR-PI is aimed at... More about Pinned DC/DC Modules

The PKY4716PI DC/DC converter platform delivers 700W of output power and typically exceeds 94% of efficiency in the industry-standard full-brick format and footprint. Aimed at the telecoms market, the device exhibits an efficiency... More about Full-Brick DC/DC Converter

In the industry standard 1/8-brick footprint, Ericsson Power Modules' PKB-C DC/DC converter has considerably more output power compared with similar available products. This is an important benefit in applications where customers ... More about Ericsson's 1/8 brick DC/DC module raises the benchmark for power and control performance

Based on an open-frame design with one side populated and utilising a board-to-board technique, Ericsson Power Modules' PKD-E DC/DC converter is fully interoperable with the original lead-free PKD series introduced in 2000. The pl... More about Optimised DC/DC converter from Ericsson helps reduce global energy consumption

The PKB4913PINB DC/DC converter module has the same footprint as its predecessor yet offers 25% more power, thus increasing the important power-to-space ratio. The module addresses all new applications using a 48V input that requi... More about RoHS-Compliant DC/DC

Moving from centralized power in 1980 (DPA-Level One) to the advanced architectures deployed twenty years later in 2000 (DPA-Level Four and Intermediate Bus Converters), in 2005 the DC-DC industry faces fresh, new challenges in th... More about Intelligent Power Control for POL devices.

For several years DPA implied a collection of two or more isolated DC/DC converters each supplying one to three output voltages and operating from a common intermediate bus voltage, usually 24 or 48Vdc. Recently, non-isolated poin... More about Selecting Your POL Architecture

Designed to provide high-quality on-board power solutions in RF power amplifier systems and other distributed power tasks, the PKJ-N DC/DC converter offers high performance and reduced cost. The future proofed converter is DfE- an... More about High-Efficiency DC/DC