TOP PRODUCTS

Norplex-Micarta has introduced the WaveMax 8000, an woven glass fabric combined with a static dissipative epoxy resin. The solder pallet material offers good mechanical strength at continuous operating temperature over 180ºC. Acco... More about Solder pallet material offers mechanical strength at 180°C

To help remove performance-killing heat from the complex, multi-level printed circuit board designs, Fujipoly has developed Sarcon GR-SL, a thermal gap filler material. When placed on top of uneven components, the material conform... More about Thermal gap filler material provides 2.7W/mK thermal conductivity

Thermal management is critical to heatsink performance which can be tested with Thermex temperature distribution film from Sensor Products. The economical, thin sensor film can be used as a design and assembly quality control chec... More about Temperature Management Sensor Film

Rakon's RGX series uses proprietary technology enabling the crystal to withstand acceleration of up to 30,000g with minimal parameter change. The patented design ensures shock survivability and vibration performance and g-sensitiv... More about High shock crystals for rugged environments

Vishay Intertechnology has released two miniature SMD quartz crystals with frequency ranges from 12 to 25MHz. The XT23 and XT35 quartz crystals offer ceramic packages that measure 3.2x2.5 and 5x3.2mm, respectively. Both quartz cry... More about Ultra-Miniature Quartz Crystals

A range of Nylon spacers and washers that are designed to grip the outside of a screw shank has been launched by Keystone Electronics. The retaining spacers and washers have specially configured inside diameters to grip screw shan... More about Spacers and washers have configured inside diameters to grip screw shank

Laird Technologies has introduced the Tpcm 580SP series phase change material that delivers a screen printable or stencilable TIM with a thermal conductivity of 4.0W/mK. The phase change material pad contains a solvent that assist... More about Phase change material has thermal conductivity of 4W/mK

Christopher Associates has introduced the S3X-BF70M and 200N series wafer bumping pastes exhibiting a high definition over time and at elevated temperatures. There are various ways to form solder deposits on wafers. Printing solde... More about Wafer bumping pastes offer high definition over time

KSW Microtec has showcased its products in secure prelaminate technologies for high-end access control and security in eGovernment, ePayment and eTicketing, at Cartes and IDentification 2010 in Paris, on December 2010. The mobile ... More about Products featuring secure prelaminate technologies for highly secure applications

Specialty Coating Systems states that potting capabilities are available on the SCS Precisioncoat spray coating and dispense system. The system dispenses potting materials, including silicones, epoxies, and urethanes, in a variety... More about Spray coating and dispense system features new potting capabilities

KSW Microtec has received MasterCard certification for its Thinlam prelaminate. The laminate is designed for high security applications in the fields of eBanking and eGovernment. The certification enabled the company to offer a ne... More about Prelaminates achieve MasterCard certification

Rhodia has introduced a halogen-free range of flame retarded Technyl polyamides, dedicated to  photovoltaic component applications. The polyamides offer a solution that meets the technical, processing, regulatory and cost-performa... More about Halogen-free polyamide suit photovoltaic industry

Chomerics Europe's thermal management and EMI shielding products, including shielded windows for automotive, medical, telecomms and military. As electronics technology has evolved, the company has developed materials to meet the n... More about Thermal And Shielding Products

A thermally efficient gap filling material from Chomerics Europe combines enhanced heat conducting properties with the ability to conform to mating surfaces at low assembly pressures. The Therm-A-Gap HCS10 is available in sheet fo... More about Gap Filling Material

Orthodyne Electronics' High Density series wire bonders are designed to address the demand for small, thin and dense discrete power semiconductor packages such as SO8, PDFN, PQFN, DSO and DrMos.The advanced leadframe handling and ... More about Wire bonders offer high reliability

Multi-Seals has introduced a line of Uni-form epoxy preforms with low outgassing properties. These cross-linked, pre-shaped thermoplastics release minimal amounts of trapped gasses or condensable material under vacuum conditions a... More about Epoxy preforms feature low outgassing properties

Drivers for hundreds of sensors from LIDAR to GPS Image processing and acquisition librariesStandard communication including JAUS and Ethernet supportFPGA-based embedded hardware for drive-by-wire systemsMulticore algorithms for r... More about NI LabVIEW Limited Only by Your Imagination

Multi-Seals has introduced Wash-Away dissolvable spacers, designed to provide consistent spacing between printed circuit boards and PCB components. These organic polymer spacers locate PCB components during soldering operations. A... More about Dissolvable spacers locate PCB components

Fischer Elektronik offers robust powder coatings that are safe for use in electronic casings that are deployed under difficult ambient conditions where anodized or painted casing surfaces are inadequate. The solution offers colour... More about Colour and structural powder coatings resist scratches

For device socketing and board-to-board interconnect, Advanced Interconnections has developed the Peel-A-Way removable terminal carriers, which suit applications that require low-profile and customisable PCB configurations. Accord... More about Removable Terminal Carriers

Elettric 80 is demonstrating its automation solutions at the Drinktec fair in Munich on September 2009. A complete, fully operational, end-of-line chain will be built, and during the fair visitors will be able to follow the demons... More about Elettric 80 demonstrates automation solutions at Drinktec fair

ACI-ecotec has developed an automatic contacting system, the ecoContact, which requires less than 40s to manufacture a thin-film PV (photovoltaic) module completely. The system offers high speed and high contact quality. This flex... More about ACI-ecotec introduces an automatic contacting system

Victrex Polymer Solutions has added the ST polymer to its Peek range. This polymer has been designed to perform specifically in applications requiring a combination of high temperature, high mechanical performance and high dimensi... More about Two Grades Of Polymer

3M claims that it has produced the world's first one-piece packaging system that provides impact absorption, eliminating the need for additional packaging materials. Protective Packaging eliminates the need for other packaging par... More about Packaging Is Thermo-Formed