TOP PRODUCTS

Macro Sensors has introduced the BB series of dimensional gaging probes that provide precise measurement of dimensions in a many quality control, inspection equipment and industrial metrology applications including online parts in... More about Dimensional gaging probes for precise measurement in automotive, medical and aerospace parts manufacture

Atollic has announced the launch of an embedded development package C and C++ development tool, and the J-Link joint test action group debug probe for debugging tasks.The probe provides a one-click debug solution. It supports the ... More about Debug probe for system analysis and real-time tracing

The new P499-F pneumatic microswitch probe is designed for the mechanical detecting of the position of a device under test in situations where space is limited.The probe incorporates a pneumatically operated plunger and an integra... More about Pneumatic Microswitch Probe

Tektronix has added four high-voltage probes and significant upgrades to three existing probe offerings. The new THDP, TMDP and P52XXA series probes offer a combination of high performance bandwidth, dynamic range and input impeda... More about High Voltage Oscilloscope Probes

Aim-TTi has launched a new type of current probe which is capable of measuring currents in PCB tracks. The Aim I-prober 520 positional current probe uses a patented technology to observe and measure current without the need to bre... More about Miniature Fluxgate Magnometer

Agilent Technologies has PrecisionProbe software for its Infiniium 90000 X-Series and 90000A Series oscilloscopes. The software, which works in conjunction with built-in hardware in the Infiniium scopes, lets engineers automatical... More about Software Enhances Analysis

GMC-I PROSyS has extended its CP3 range of AC/DC, non-invasive, current measurement probes.  Offering measurement sensitivity into the milliamp range, and with resolution of 1 mA, the range provides engineers with probes that are ... More about Current Measurement Probes

Eurolec has enhanced its CS series calibration sources, with block models for calibration with a temperature control system and a pocket for a reference thermometer. Probe holes provide a choice of diameters for contact or probe t... More about Temperature Calibration

GMC-I PROSyS enables a new level of accuracy and ease-of-use with the introduction of its PRO-flex ACP 3000 series of flexible AC current probes.The probes measure AC current from 100mA to 3kA, or to 6kA, depending on the model. E... More about Flexible AC Current Probes

GMC-I PROSyS has extended its range of non-invasive current measurement probes with the MICRO-flex ACP 2005 and the ACP 2015, providing a flexible and accurate means of measuring AC currents from 200mA to 2000A, with no requiremen... More about Non-Invasive Current Measurement Probes

Touchdown Technologies' has introduced its first probe card for single-touchdown, high-volume testing of advanced DRAM memory devices. Capable of testing an entire 300mm wafer with only 2g of force per probe ,the 1Td300 probe card... More about Single-touchdown

Fluke's family of clamp meters meet the requirements of users testing and maintaining electrical systems, industrial equipment and controls and commercial and industrial heating, ventilation and air conditioning (HVAC) equipment. ... More about Clamp Meter Family Ready

Aeroflex / Inmet has announced a family of RF test cables. The iCALIBER brand combines the quality and performance of high end test cables with the low cost of ownership normally reserved for economy grade test cables.  Normal fai... More about Low-coast RF Test Cables

The P222 from Peak Test Services is a push-back test probe featuring an integrated switch function and designed for tests on devices with 3mm centres. Push-back tests are used for testing safety-relevant wire harnesses and connect... More about Push-back Test Probe

TESEQ has two new USB/RS232 electric field probes. The PMM EP-600 and EP-601 active broadband field probes benefit from a true spherical symmetrical dipole configuration. Sampling at a rate of 22S/s to 0.03S/s depending on filter ... More about Electric Field Probe

LeCroy has launched the WaveLink 25GHz high bandwidth differential solder-in probe. This probe expands the recently introduced 13-20GHz WaveLink probe line and is matched to the WaveMaster 8 Zi oscilloscope product line, which inc... More about Solder-In Probes

Agilent Technologies launched the U1210 series handheld clamp meters, with up to 1000A of high-current measurement capability for cables up to 2in. in diameter. Agilent also announced an updated range of handheld instruments in vi... More about Handheld Clamp Meters

Seica has announced the latest addition to its new generation of flying probe test systems. These test solutions can be used to improve quality, increase productivity and save money in automobile, military and consumer markets. Th... More about Flying probe test system allows cost savings in military applications

National Instruments has announced six new switch modules, which feature options for high-density matrices, multiplexers, general-purpose relays and RF applications. The switches, which are also available in PXI versions, can be p... More about Six Switch Modules

Ashling Microsystems, a NeST Group company, has launched a high performance JTAG debug probe that targets Texas Instruments' DSP platforms. The Opella-XDS560 is designed to work with TI's CCS (code composer studio) IDE. The probe ... More about Ashling launches a debugging probe

Multi-Contact has launched the third generation of Isoprobe high frequency test probes. The Isoprobe III probes have a coaxial connecting cable with low capacitance, which combined with changes to the interior of the probe, produc... More about Multi-Contact launches third generation Isoprobe test probes

Now available is the TTi Satori range of high-performance USB-based RF power-measurement sensors. The product range consists of the ST series of 12.4, 18.5 and 26.5GHz USB power sensors. These devices are complete miniature power ... More about Measurement Sensors

The P730 and P735 from Peak Test Services make up a new range of test probes designed for testing fine-pitch components with 1.27mm centres. Featuring a working travel of 2.0mm and an overall length of 16.5mm, the probes are ident... More about Range Of Test Probes

FormFactor has developed a new technology to enhance its advanced wafer probe cards and offer improved performance and productivity to customers. The new technology, also known as RapidSoak technology, is designed to reduce the ti... More about RapidSoak Technology